PERTEMUAN 12: TUGAS PEMBUATAN JARINGAN SEDERHANA CISCO

1. Navigating the IOS

Objectives

Part 1: Establish Basic Connections, Access the CLI, and Explore Help

Part 2: Explore EXEC Modes

Part 3: Set the Clock

Background

In this activity, you will practice skills necessary for navigating the Cisco IOS, such as different user access modes, various configuration modes, and common commands used on a regular basis. You will also practice accessing the context-sensitive Help by configuring the clock command.

1. Tampilan Awal

2. CLI Settings Setting Jam dan Waktu



3. Hasil Assessment

2. CONFIGURING INITIAL SWITCH SHARING

Objectives

Part 1: Verify the Default Switch Configuration

Part 2: Configure a Basic Switch Configuration

Part 3: Configure a MOTD Banner

Part 4: Save Configuration Files to NVRAM

Part 5: Configure S2

Background

In this activity, you will perform basic switch configurations. You will secure access to the command-line interface (CLI) and console ports using encrypted and plain text passwords. You will also learn how to configure messages for users logging into the switch. These banners are also used to warn unauthorized users that access is prohibited.

1. Tampilan Awal



2. CLI Settings Konfigurasi Switch 1



3. CLI Settings Konfigurasi Switch 2

4. Hasil Assesment

 3. CONFIGURING INITIAL ROUTER SETTING

Objectives

Part 1: Verify the Default Router Configuration

Part 2: Configure and Verify the Initial Router Configuration

Part 3: Save the Running Configuration File

Background

In this activity, you will perform basic router configurations. You will secure access to the CLI and console port using encrypted and plain text passwords. You will also configure messages for users logging into the router. These banners also warn unauthorized users that access is prohibited. Finally, you will verify and save your running configuration.

1. Tampilan Awal



2. CLI Settiing Router



3. Hasil Assesment

4. CONFIGURING INITIAL ROUTER SETTING

Objectives

Part 1: Display Router Information

Part 2: Configure Router Interfaces

Part 3: Verify the Configuration

Background

In this activity, you will use various show commands to display the current state of the router. You will then use the Addressing Table to configure router Ethernet interfaces. Finally, you will use commands to verify and test your configurations.

Note: The routers in this activity are partially configured. Some of the configurations are not covered in this course, but are provided to assist you in using verification commands

1. Tampilan Awal

2. CLI Settings Router 1

3. CLI Setting Router 2

4. Hasil Assesment